HOW TO CARE FOR YOUR HOME'S HOT WATER SYSTEM PROPERLYSTEPS ON HOW TO CARE FOR YOUR HOME'S HOT WATER SYSTEM PROPERLYSTEPS TO PROLONG THE LIFESPAN OF YOUR HOME'S HOT WATER SYSTEM BY MAINTENANCE

How to Care for Your Home's Hot Water System ProperlySteps on How to Care for Your Home's Hot Water System ProperlySteps to Prolong the Lifespan of Your Home's Hot Water System By Maintenance

How to Care for Your Home's Hot Water System ProperlySteps on How to Care for Your Home's Hot Water System ProperlySteps to Prolong the Lifespan of Your Home's Hot Water System By Maintenance

Blog Article

Suggested Site

Right here on the next paragraphs you will find lots of first-rate points concerning Tips on Maintaining a Water Heater.


How to Maintain Your Water Heater & Prolong its Life
Warm water is important for day-to-day comfort, whether it's for a rejuvenating shower or cleaning meals. To guarantee your hot water system runs effectively and lasts longer, normal upkeep is key. This write-up offers sensible ideas and insights on how to preserve your home's warm water system to prevent disruptions and costly repairs.

Introduction


Preserving your home's warm water system might seem complicated, yet with a few easy steps, you can ensure it runs efficiently for years to come. This overview covers every little thing from recognizing your warm water system to DIY maintenance ideas and recognizing when to call in specialist help.

Significance of Preserving Your Warm Water System


Normal upkeep not just extends the lifespan of your hot water system however likewise guarantees it runs successfully. Neglecting maintenance can result in decreased efficiency, higher energy bills, and even premature failure of the system.

Signs Your Hot Water System Requirements Maintenance


Understanding when your warm water system requires interest can protect against significant problems. Watch out for indications such as irregular water temperature level, strange noises from the heater, or corroded water.

Recognizing Your Warm Water System


Prior to diving right into upkeep jobs, it's practical to recognize the standard parts of your warm water system. Usually, this includes the water heater itself, pipes, anode rods, and temperature level controls.

Month-to-month Upkeep Tasks


Normal monthly checks can help catch minor problems before they intensify.

Purging the Hot Water Heater


Purging your hot water heater gets rid of debris build-up, boosting efficiency and prolonging its life.

Checking and Replacing Anode Rods


Anode rods prevent corrosion inside the tank. Evaluating and changing them when worn is important.

Examining and Adjusting Temperature Level Setups


Changing the temperature settings makes certain ideal performance and safety.

Do It Yourself Tips for Maintenance


You can perform numerous upkeep tasks on your own to maintain your hot water system in leading problem.

Checking for Leaks


Consistently examine pipes and links for leaks, as these can lead to water damages and higher bills.

Checking Stress Alleviation Valves


Examining the stress relief valve ensures it operates properly and protects against extreme pressure build-up.

Protecting Pipes


Shielding hot water pipelines decreases heat loss and can conserve energy.

When to Call a Specialist


While DIY upkeep is helpful, some concerns need professional know-how.

Complex Concerns Needing Specialist Assistance


Instances include significant leaks, electric problems, or if your hot water heater is regularly underperforming.

Regular Professional Upkeep Benefits


Expert upkeep can include detailed evaluations, tune-ups, and making certain compliance with safety and security standards.

Final thought


Normal maintenance of your home's warm water system is important for effectiveness, long life, and expense financial savings. By following these ideas and recognizing when to look for professional aid, you can guarantee a trusted supply of hot water without unexpected interruptions.

Water Heater Maintenance Tips to Extend the Life of Your System


Every homeowner should do their best to properly maintain their hot water heater system. Whether you have a gas hot water tank or an electric hot water heater, even a tankless system, there are some things that can be done on your own without calling upon a professional hot water installer.



These simple maintenance tips will help to ensure the life of your hot water systems so you don't have to worry about being without hot water for any considerable amount of time.


Test the TPR Valve


This safety feature has been installed on every hot water tank since 1985 and will help avoid an explosion of your hot water tank if built-up pressure occurs.



To access and test your TPR valve, locate the small dial that looks like a tire stem or bicycle valve on the hot water tank. Turn the dial to shut off hot water to your home or business, then turn it in the opposite direction until you hear hissing noises from the hot water tank.



The valve should be set at 120psi [pounds per square inch]. If pressure is too high, simply open the hot water tanks faucet slightly to reduce the pressure from the pressure relief valve before testing again.


Check the Anode Rod


The anode rod inside your hot water tank attracts rust and sediment that would otherwise build up inside of your hot water tank and corrode it away. A hot water heater maintenance tip is every 6 months you should check this anode rod to ensure it's not completely deteriorated yet (please note: some newer hot water heaters do not have an anode rod).



To replace this hot water heater maintenance tip, simply unscrew the hot water tank drain valve and the hot water tank will drain out. Remove the hot water heater vent screen with a putty knife or flat-head screwdriver to reach the rod. Unscrew it from its mount, then purchase a new hot water heater maintenance tip anode rod (same size as your hot water tanks original rod) and screw it back on.


Drain the Tank


Draining your hot water tank is probably one of those 'gotta-do' tasks you've been putting off for way too long... Well actually, you should never let your hot water tank run completely dry (unless you want to damage the hot water tank).



If your hot water heater runs out of hot water, simply drain the hot water tank. Turn off your hot water heater's TPR valve (as mentioned before) and open the hot water tanks faucet.


Adjust the Temperature


The hotter your hot water supply is, the more energy it will consume. You can adjust this setting by turning your hot water heaters thermostat up or down accordingly. This simple hot water heater maintenance tip can save you money on monthly utility bills if done correctly! This is great for business owners with employees that leave their hot water run too long at home or folks that like really hot showers!



Use a flathead screwdriver to adjust the temperature. This works for either a gas water heater or electric water heater.


Insulate the Heater


Insulating an older water heater keeps hot water hot for much longer. Insulating hot water heaters is one of the best hot water heater maintenance tips you can follow because it also helps keep your hot water tank water hot while waiting for use (instead of cooling off).



You can insulate hot water heaters by purchasing an insulation shield or simply wrapping the hot water tank in bubble wrap.


Insulate the Pipes


Insulating hot water heaters pipes keeps them from losing heat down to the hot water heater, which saves more energy and prolongs the life of your hot water heater! Simply purchase foam pipe insulation from a hardware store and wrap each pipe with it before connecting it to the hot water tank.


Flush Yearly


Flushing out sediment can help you be hot water heater maintenance tip savvy. Sediment build-up and calcium deposits in hot water tanks is caused by everyday minerals found in tap and well water (hardness) that enters the hot water tank through your hot and cold water supply valve.



A simple annual hot water tank flush will remove this sediment from your hot water heater before it has time to corrode its inner walls.


Replace the Air Intake Filter


The air intake filter of a hot water heater cuts down on energy costs since it allows less air into the unit, therefore making it run more efficiently. This simple hot water heater maintenance tip saves money on hot water heaters hot and cold water pipes by preventing it from taking in hot air that reduces the hot water tanks hot water capacity.


Get a Professional Inspection


For the safety of gas heaters or an electric heater, you should always get a professional hot water heater inspection at least once per year or after any maintenance hot water heater tips that needs to be done. A professional hot water tank inspector will take note and recommend any further action if need be to ensure your water heater's efficiency.


Schedule Water Heater Maintenance From ARS/Rescue Rooter


If you feel like your water heating costs are getting too high, or if your existing water heater doesn't run efficiently anymore, you need a trusted plumbing company to perform water heater maintenance service.



At ARS/Rescue Rooter, our trained plumbers perform basic water heater maintenance on a regular basis, and can help extend the life of your water heater. And if your existing system needs replaced, we have a wide selection of tankless water heater options.

https://www.ars.com/blog/water-heater-maintenance-tips


Tips For Maintaining Your Hot Water Heater

I was made aware of that article on Tips For Maintaining Your Hot Water Heater from a pal on another website. Do you know another individual who is enthusiastic about the subject? Take a moment to promote it. Thank-you for going through it.


Request A Quote

Report this page